Model | G2AxxP02 | G2AxxP04 | G2AxxP08 | G2AxxP20 | G2AxxP40 | G2BxxP04 | G2BxxP08 | G2BxxP20 | G2CxxP04 |
Mounting Options | Airborne or fixed (External power supply) | Vehicle Mounted | Handheld | ||||||
Power Supply | 11 ~ 17V | 28 ~ 48V | Batteries | ||||||
RF Specifications | |||||||||
Output Power | 2W | 4W | 8W | 20W | 40W | 4W | 8W | 20W | 4W |
Range | 60+km | 100+km | 150+km | 200+km | 500+km | 150+km | 180+km | 300+km | 100+km |
Frequency Bands | 1300 ~ 1500MHz | 500 ~ 680 MHz / 1300 ~ 1500 MHz / 4200 ~ 4400 MHz / 4400 ~ 5000 MHz | |||||||
Bandwidth | 1.25 / 2.5 / 5 / 10 / 20 MHz | 1.25 / 2.5 / 5 / 10 / 20 / 30 / 40 MHz | |||||||
Data Rate | 25+Mbps @ 10MHz 50+Mbps @ 20MHz | Diversity: 30+Mbps @ 10MHz / 60+Mbps @ 20MHz / 90+Mbps @ 30MHz / 120+Mbps @ 40MHz MIMO: 60+Mbps @ 10MHz / 120+Mbps @ 20MHz / 180+Mbps @ 30MHz / 220+Mbps @ 40MHz | |||||||
Anti-jamming | Intelligent frequency channel Selection / Autonomous frequency hopping | ||||||||
RF Modulation | QPSK / 16QAM / 64QAM / 256QAM / 1024QAM adaptive | ||||||||
Air Rate Adaptation | MCS, Auto adaptive or fixed rate | ||||||||
Receive Sensitivity | -103dBm @ 5MHz,-105dBm @ 2.5MHz,-107dBm @ 1.25MHz | ||||||||
Waveform | COFDM + 2T2R/MIMO + dynamic TDMA + high dynamic routing protocols | ||||||||
Latency | 7ms @ Single hop | ||||||||
Mobile Speed supported | 1000+km/h | ||||||||
Positioning | Integrated GPS and BD | ||||||||
Voice | Not supported | IP voice conferencing / PTT intercom | |||||||
Power Consumption, Dimension and Weight | |||||||||
Power Consumption | 4 ~ 10W | 6 ~ 20W | 8 ~ 40W | 15 ~ 80W | 20 ~ 160W | 8 ~ 28W | 8 ~ 40W | 20 ~ 100W | 6 ~ 20W |
Battery Life | 4 ~ 6 hours | 4 ~ 6 hours | 3 ~ 4 hours | 3 ~ 4 hours | |||||
Dimensions (mm) | 95x65x22 | 100x60x30 | 110x92x42 | 140x130x44 | 255x228x68 | 230x130x45 | 235x150x60 | 269x180x64 | 222x74x38 |
Weight | 140g | 235g | 400g | 850g | 4200g | 1600g | 2450g | 3300g | 930g |
Networking and Encryptions | |||||||||
Scalability | 64 nodes ( 128 or 256 nodes extended ) | ||||||||
Topologies | Star, chain, hub or spoke, backbone, hybrid | ||||||||
Multi-hop Capability | Over 8 hops | ||||||||
Access Time | 25 seconds after power on | ||||||||
Intranet Multicast | Supports IP data multicast and broadcast, with the ability to set blacklists and white lists, and point-to-point and point-to-multipoint multicast from serial port to serial port. | ||||||||
Link Selection | Supports QoS routing and the ability to drop weak connections, enhancing the stability of network operations. | ||||||||
QoS Assurance | Supports priority settings for IP addresses, protocol + port numbers, DSCP, etc., ensuring the real-time and reliable transmission of high-priority services. | ||||||||
Internet Extension | Any node within the network can act as a gateway, allowing nodes to access the internet through the gateway node, effectively extending the coverage of the internet. | ||||||||
WiFi AP | Provides the WiFi hotspot for mobile phones, tablets, computers, laptop, and other terminal devices to access. | ||||||||
Encryption | DES / AES128 / AES256 | ||||||||
Management and Monitoring | |||||||||
Management Methods | Provides management through WEB_UI, Windows APP, Linux APP, Android APP, and other methods. | ||||||||
Quick Configuration | By logging into the WEB_UI of any radio station, you can quickly configure and manage all nodes within the network. | ||||||||
Configuration Management | Allows for dynamic display of network topology, link quality, signal strength, ambient noise, burst interference, and operating temperature, among other parameters for configured radio stations. It enables remote one-click changes to key network parameters and remote configuration and upgrades. | ||||||||
Spectrum Scanning | Views the ambient noise and burst interference of candidate frequencies to guide the optimization of working frequency settings. | ||||||||
Status Display | The WEB_UI can display the topology status of the entire network, intuitively showing node ambient noise, signal strength, communication distance, transmission rate, time slot resource occupancy ratio, and temperature. | ||||||||
Relay path | The WEB_UI can query and dynamically display the actual data transmission path. | ||||||||
Alarm | The WEB_UI can provide alert notifications for common exceptions or faults in node radios. | ||||||||
Data Interface | |||||||||
Ethernet | 1 | 2 | 1 | 2 | 1 | ||||
RS-232 | 1 | 2 | 1 | 2 | 1 | ||||
Environmental Adaptability | |||||||||
Operating Temperature | -40 ~ +65℃ (Batteries not included) | ||||||||
Storage Temperature | -50 ~ +80℃ (Batteries not included) |
Applications of Radio Modems in SCADA Systems
Applications of Radio Modems in PLC Systems
Applications of Radio Modems in Telemetry systems
Applications of Radio Modems in Electrical Power Transmission / Distribution
Applications of Radio Modems in Oil and Gas Production Monitoring
Applications of Radio Modems in Wastewater Collection and Treatment Facilities.
Applications of Radio Modems in Agricultural Automatic Irrigation